4.4) Use a ZigBee Coordinator USB dongle and connect/join ZigBee end devices to the Zigbee network.
From previous blog, about setting up The Zigbee2MQTT Now we gonna try to connect a basic IoT Device to the Zigbee Network
Component Required
- Xiaomi Temperature and Humidity Sensor
Step 1 : Start your Zigbee2MQTT service
- Like a previous task\
Step 2 : To the web interface
- On your web browser, go to http://localhost:8080 just like in the configuration file.
Step 3 : On your sensor
- To Connect or Disconnect the device
- Hold the button on the sensor for around 5 seconds then release.
- The the blue LED will start to blink, indicate that your device is connect or disconnect to the network.
- You will see some activity happen on your Zigbee2MQTT terminal, that means your sensor is connecting to the network!
- Check it out on the web interface, ITS THERE
Seems like it missing something. . .
The temperature , humidity and battery level. Still doesn’t shows up! We are fixing this by just reconnect them, then its works just fine!
